How much does the Brother S700Xd2-100T weigh?

2700 kg, per S300Xd2 | Machine Tools | Brother (machinetool.global.brother).

What is the maximum spindle speed of the Brother S700Xd2-100T?

12000 rpm, per S300Xd2 | Machine Tools | Brother (machinetool.global.brother).

What is the X-axis travel of the Brother S700Xd2-100T?

700 mm, per S300Xd2 | Machine Tools | Brother (machinetool.global.brother).

Brother S700Xd2-100T

The Brother S700Xd2-100T is a CNC machining center with X/Y/Z travels of 700/450/380 mm and an 800 × 450 mm table. It stores up to 100 tools in a 28-tool turret magazine plus left and right 36-tool stockers. It uses the CNC-D00 controller and a BT30 spindle with a standard 12,000 min-1 maximum speed.

Source checked13/13 values · 2026-10-25

Brother CNC mill

Travel X

700mm

Travel Y

450mm

Travel Z

380mm

Spindle max

12,000rpm

Weight

2,700kg

Specification

1 source

Category	cnc mill
Spindle taper	BT30
Rapid traverse	56 m/min
Tool capacity	100
Table length	800 mm
Table width	450 mm
Table load	250 kg

Quick answers

How much does the Brother S700Xd2-100T weigh?: 2700 kg, per S300Xd2 | Machine Tools | Brother (machinetool.global.brother).
What is the maximum spindle speed of the Brother S700Xd2-100T?: 12000 rpm, per S300Xd2 | Machine Tools | Brother (machinetool.global.brother).
What is the X-axis travel of the Brother S700Xd2-100T?: 700 mm, per S300Xd2 | Machine Tools | Brother (machinetool.global.brother).

Study notes

Uses the CNC-D00 controller; the 5AX variants use the CNC-D00v(DB) controller.
The 100-tool magazine comprises a 28-tool turret magazine and left and right 36-tool tool stockers.
Conversation language is not available on the S700Xd2-100T; only NC language is available.
Chip conveyors can only be selected for the S700Xd2-100T.
Turret magazine tool change time is 0.7 s tool-to-tool and 1.4 s chip-to-chip.
Tool stocker handling time is approximately 5 s for one tool and approximately 140 s for all 28 tools.
Spindle options include 10,000 min-1 high-torque and 20,000 min-1 specifications in addition to the standard 12,000 min-1 specification.
CTS and BT dual contact spindle (BIG-PLUS) are optional.
Repeatability of bidirectional axis positioning is stated as less than 0.004 mm (ISO 230-2:2014).
Max tool weight is 3.0 kg for the turret magazine (4.0 kg with parameter change) and 4.0 kg for the tool stocker.

Safety

A safety fence is required when the optional side shutter is used.
A relocation detection device is required depending on the destination; machines with this device have RD at the end of the model name.