Machine Schema
Connect MCP

Brother R650Xd2

The Brother R650Xd2 is a CNC machining center with a QT (Quick Turn) 0°/180° turntable pallet changer. Its X/Y/Z travels are 650/400/305 mm and its standard spindle speed is 12,000 min-1. The two-face pallet changer allows workpieces on one pallet to be changed while the other pallet is being machined.

Source checked14/14 values · 2026-10-25BrotherCNC mill
X 650Y 400Z 305SPINDLE 12,000 rpmMAS-BT30ALL DIMENSIONS mmR650Xd2 · TRAVEL ENVELOPEIsometric · X, Y, Z to scale
Travel X
650mm
Travel Y
400mm
Travel Z
305mm
Spindle max
12,000rpm
Axes
7

Specification

1 source
Categorycnc mill
Weight3,550 kg
Spindle taperMAS-BT30
Rapid traverse50 m/min
Table length800 mm
Table width535 mm
Table load200 kg
Supply voltageAC 200 to 230 V±10%, 3-phase, 50/60Hz±2%

Quick answers

How many axes does the Brother R650Xd2 have?
7, per R650Xd2 | Machine Tools | Brother (machinetool.global.brother).
How much does the Brother R650Xd2 weigh?
3550 kg, per R650Xd2 | Machine Tools | Brother (machinetool.global.brother).
What is the maximum spindle speed of the Brother R650Xd2?
12000 rpm, per R650Xd2 | Machine Tools | Brother (machinetool.global.brother).
What is the X-axis travel of the Brother R650Xd2?
650 mm, per R650Xd2 | Machine Tools | Brother (machinetool.global.brother).

Study notes

  • CNC unit: CNC-D00. Control axes: 7 (X, Y, Z plus four additional axes); simultaneously controlled positioning axes: 5 (X, Y, Z, A, B).
  • Tool storage capacity is listed as 14/22/28 tools; a 40-tool magazine is also listed for R650Xd2 and gives Z travel 435 mm.
  • QT table: 0°/180° turntable, one-face table dimension 800 x 535 mm, work area 800 x 400 mm.
  • Max turning diameter: ø1250 mm standard, ø1300 mm with turning diameter enlargement option; max jig height 350 mm standard, 450 mm with low table option.
  • Table change repeatability: 0.005 mm in X/Y/Z directions at 335 mm from the center of rotation.
  • Bidirectional axis positioning accuracy: 0.006–0.020 mm (ISO 230-2:1988); repeatability of bidirectional axis positioning: less than 0.004 mm (ISO 230-2:2014).
  • Spindle motor ratings (10 min/continuous): 12,000 min-1 spec 10.1/7.0 kW; 10,000 min-1 high-torque 12.8/9.2 kW; 20,000 min-1 7.4/5.1 kW.
  • Power supply: AC 200–230 V ±10%, 3-phase, 50/60 Hz ±2%; continuous power capacity 10.4 kVA.
  • External communication: USB memory interface, Ethernet, RS232C (optional); OPC UA listed; optional fieldbus slaves include PROFINET, EtherNet/IP, PROFIBUS DP, DeviceNet and CC-Link.
  • Memory capacity: 500 MB, 3 GB optional; up to 4,000 registrable programs.

Safety

  • Maximum tool length, diameter and weight are limited by spindle speed, configuration and center of gravity; the document figures are for reference only.
  • When using the hydraulic rotary joint, Y-axis travel becomes 290 mm.
  • Air supply: 0.4–0.6 MPa; recommended value 0.5 MPa; set pressure higher than the recommended value.
  • Max loading capacity can be increased to 300 kg per face by changing a parameter; consult separately.
  • For the 40-tool magazine, ATC monitoring and stuck-chip detection are not available.
↑↓ navigate↵ openesc close