Tormach PathPilot Operator Console

The PathPilot Operator Console is an all-in-one control unit for Tormach M, M+, and MX CNC mills. It runs the PathPilot control software and provides a touchscreen, front-panel hardware knobs for feed rate, spindle RPM and maximum velocity overrides, and Cycle Start and Feedhold buttons. A handheld jog pendant with a three-position increment selector allows manual positioning of the machine axes.

Source checked4/4 values · 2026-10-25TormachCNC control

Specification

1 source

Kind	cnc control
Series	PathPilot
Weight	27 kg
Input voltage	115Vac or 230Vac

Study notes

PathPilot software is installed on the console.
Storage capacity 40 GB; RAM 4 GB.
17 in. (43 cm) diagonal touchscreen.
Jog pendant covers X-, Y-, Z- and A-axes with three jog size increments from 0.0001 in. to 0.01 in.
Override knobs for feed rate, RPM and maximum velocity range from 0% to 200%.
Two front USB ports for USB thumb drives and file transfer.
Wireless-N Wi-Fi adapter is included.
Compatible machines: 1100MX, 1100M+, 1100M, 770MX, 770M+, 770M.
Requires a Tormach M, M+ or MX CNC mill with Ethernet control and a machine enclosure.
Included items: machine controller, jog pendant, Wi-Fi adapter, power adapter, controller enclosure mount and controller wire kit.

Safety

Hardware E-Stop and machine reset buttons are located on the front panel.
Installation requires a machine enclosure.