{"id":"gcode-g92-3","model_id":"G92.3","name":"LinuxCNC G92.3 Restore G92 Offsets","summary":"G92.3 is a LinuxCNC G-code that restores the G92 coordinate system offset to the values saved in parameters 5211 through 5219. It lets a program reuse G92 offsets that were set by an earlier program.","study_notes":["G92.3 sets the G92 offset to the values saved in parameters 5211 to 5219.","A first program can set offsets with G92; the values are saved when it exits and restored when a second program uses G92.3.","The source says not to use G92.1 in the remainder of the first program if the offsets are to be saved."],"safety_notes":[],"sources":[{"url":"https://linuxcnc.org/docs/html/gcode/g-code.html#gcode:g92.3","title":"G-Codes","accessed":"2026-10-26"}],"verification":{"status":"source_checked","checked_at":"2026-10-26","values":3,"method":"llm_source_check"},"updated_at":"2026-10-26","type":"instruction","spec":{"language":"gcode","code":"G92.3","syntax":"G92.3","parameters":[],"dialect":"LinuxCNC","related":[],"standards":[]},"url":"https://machineschema.com/instruction/gcode-g92-3","license":"https://creativecommons.org/licenses/by/4.0/"}