{"id":"gcode-g10-l0","model_id":"G10 L0","name":"LinuxCNC G10 L0 Reload Tool Table Data","summary":"G10 L0 is a LinuxCNC G-code that reloads all tool table data. It requires that no tool is currently loaded in the spindle. When executed, tool parameters #5401-#5413 update immediately, altered tool diameters apply to later G41/G42 cutter radius compensation, and existing G43 tool length compensation values remain in effect until updated by a new G43 command.","study_notes":["G10 L0 reloads all tool table data.","Tool parameters #5401-#5413 are updated immediately when G10 L0 is used.","Altered tool diameters are used for subsequent G41/G42 cutter radius compensation commands.","Existing G43 tool length compensation values remain in effect until updated by new G43 commands."],"safety_notes":["Requires that no current tool is loaded in the spindle."],"sources":[{"url":"https://linuxcnc.org/docs/html/gcode/g-code.html#gcode:g10-l0","title":"G-Codes","accessed":"2026-10-26"}],"verification":{"status":"source_checked","checked_at":"2026-10-26","values":3,"method":"llm_source_check"},"updated_at":"2026-10-26","type":"instruction","spec":{"language":"gcode","code":"G10 L0","syntax":"G10 L0","parameters":[],"dialect":"LinuxCNC","related":[],"standards":[]},"url":"https://machineschema.com/instruction/gcode-g10-l0","license":"https://creativecommons.org/licenses/by/4.0/"}