{"id":"tormach-770mx","model_id":"770MX","name":"Tormach 770MX","summary":"The Tormach 770MX is a CNC milling machine with X, Y, and Z travels of 356 mm, 191 mm, and 337 mm. It uses a 1.12 kW spindle that reaches 10,000 RPM and is controlled by the PathPilot controller. The machine weighs 431 kg, and the controller supports up to 4-axis continuous machining.","study_notes":["Maximum feed rate: X and Y 300 IPM (7.62 m/min); Z 250 IPM (6.35 m/min).","Spindle taper: BT30; transmission: Poly-V belt; thread machining includes rigid tapping, tension/compression tapping, and thread milling.","Table size: 26 × 8 in (660 × 203 mm); three 5/8 in (15.9 mm) table slots.","Spindle nose to table maximum clearance: 12.75 in (324 mm); spindle centerline to machine column: 8.6 in (218 mm).","Typical system footprint: 56 × 48.5 in (1422 × 1232 mm); overall system height: 88 in (2235 mm).","Frame and table are cast iron with hand-scraped hydrodynamic ways and tapered adjustment gibs.","Way surfaces are low-friction PTFE-filled, acetyl-bonded sliding surfaces similar to Rulon and Turcite.","PathPilot controller supports up to 4-axis continuous machining, conversational programming, 80 GB program memory, and built-in Dropbox support.","Accessories include automatic tool changer, 4th axis, SmartCool coolant system, and RapidTurn Chucker lathe accessory."],"safety_notes":["Electrical requirement: single-phase 115 VAC, 50/60 Hz, 15 A breaker."],"sources":[{"url":"https://tormach.com/media/asset/7/7/770mx_spec_sheet_0819.pdf","title":"https://tormach.com/media/asset/7/7/770mx_spec_sheet_0819.pdf","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":8,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"tormach","controllers":["tormach-pathpilot-operator-console"],"weight_kg":431,"travel_x_mm":356,"travel_y_mm":191,"travel_z_mm":337,"spindle_max_rpm":10000,"spindle_power_kw":1.12,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/tormach-770mx","license":"https://creativecommons.org/licenses/by/4.0/"}