# Tormach 1100MX CNC Milling Machine

Hardware · `1100MX` · verification: source checked

The Tormach 1100MX is a CNC milling machine with 457 mm X-axis, 279 mm Y-axis, and 413 mm Z-axis travels. Its spindle runs up to 10,000 RPM and has 1.49 kW spindle power. The typical system weight is 726 kg.

## Specification

| Property | Value |
|---|---|
| Category | cnc mill |
| Weight | 726 kg |
| Travel X | 457 mm |
| Travel Y | 279 mm |
| Travel Z | 413 mm |
| Spindle max | 10000 rpm |
| Spindle power | 1.49 kW |

## Connected

- Manufacturer: [Tormach](https://machineschema.com/manufacturer/tormach.md)

## Study notes

- Travels: X 457 mm, Y 279 mm, Z 413 mm.
- Spindle maximum speed is 10,000 RPM; spindle taper is BT30.
- Spindle power is 2 hp (1.49 kW).
- Maximum feed rate is 300 IPM (7.62 m/min) on X and Y and 230 IPM (5.84 m/min) on Z.
- Table size is 863 mm × 241 mm with three 15.9 mm slots.
- Power required is single-phase 230 Vac, 50/60 Hz, 20 A breaker.
- Controller supports up to 4-axis continuous machining.
- Usable G-code memory: Brix Controller 80 GB; PathPilot Operator Console 40 GB.
- Typical system footprint is 1753 mm × 1435 mm; overall height is 2439 mm.
- Frame and table are cast iron with hand-scraped hydrodynamic ways and tapered adjustment gibs.
- Way surfaces are low-friction PTFE-filled, acetyl-bonded sliding surface.

## Sources

1. [https://tormach.com/media/asset/1/1/1100mx_spec_sheet_0221.pdf](https://tormach.com/media/asset/1/1/1100mx_spec_sheet_0221.pdf) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/tormach-1100mx  
JSON: https://machineschema.com/hardware/tormach-1100mx.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.