{"id":"tormach-1100mx","model_id":"1100MX","name":"Tormach 1100MX CNC Milling Machine","summary":"The Tormach 1100MX is a CNC milling machine with 457 mm X-axis, 279 mm Y-axis, and 413 mm Z-axis travels. Its spindle runs up to 10,000 RPM and has 1.49 kW spindle power. The typical system weight is 726 kg.","study_notes":["Travels: X 457 mm, Y 279 mm, Z 413 mm.","Spindle maximum speed is 10,000 RPM; spindle taper is BT30.","Spindle power is 2 hp (1.49 kW).","Maximum feed rate is 300 IPM (7.62 m/min) on X and Y and 230 IPM (5.84 m/min) on Z.","Table size is 863 mm × 241 mm with three 15.9 mm slots.","Power required is single-phase 230 Vac, 50/60 Hz, 20 A breaker.","Controller supports up to 4-axis continuous machining.","Usable G-code memory: Brix Controller 80 GB; PathPilot Operator Console 40 GB.","Typical system footprint is 1753 mm × 1435 mm; overall height is 2439 mm.","Frame and table are cast iron with hand-scraped hydrodynamic ways and tapered adjustment gibs.","Way surfaces are low-friction PTFE-filled, acetyl-bonded sliding surface."],"safety_notes":[],"sources":[{"url":"https://tormach.com/media/asset/1/1/1100mx_spec_sheet_0221.pdf","title":"https://tormach.com/media/asset/1/1/1100mx_spec_sheet_0221.pdf","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":7,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"tormach","controllers":[],"weight_kg":726,"travel_x_mm":457,"travel_y_mm":279,"travel_z_mm":413,"spindle_max_rpm":10000,"spindle_power_kw":1.49,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/tormach-1100mx","license":"https://creativecommons.org/licenses/by/4.0/"}