# Makino UX6

Hardware · `UX6` · verification: source checked

The Makino UX6 is a wire electrical discharge machining (EDM) machine with a stationary worktable and X, Y and Z linear axes plus U- and V-axis adjustment. It uses the Makino Hyper-i control with a 24-inch HD touchscreen and supports wire diameters from 0.100 mm to 0.300 mm. The machine cuts conductive workpieces using a wire electrode and dielectric fluid.

## Specification

| Property | Value |
|---|---|
| Category | cnc edm |
| Travel X | 650 mm |
| Travel Y | 450 mm |
| Travel Z | 420 mm |
| Table length | 910 mm |
| Table width | 710 mm |
| Table load | 1500 kg |

## Connected

- Manufacturer: [Makino](https://machineschema.com/manufacturer/makino.md)

## Study notes

- U-axis and V-axis each have ±75 mm travel.
- Maximum workpiece size is 1000 x 800 x 420 mm.
- Work tank size is 1,070 mm x 880 mm.
- Available wire diameters are 0.100, 0.150, 0.200, 0.250 and 0.300 mm.
- Uses the Makino Hyper-i control with a 24-inch HD touchscreen.
- Control operation follows a Program/Setup/Run sequence.
- Hyper-i control includes a handbox, E-Tech Doctor help function, digital manuals and instructional videos.
- HyperDrive Extreme Guide System provides jet-less wire threading.
- Wire guides can be exchanged without vertical wire alignment and repeat to within 5 µm (0.0002 in).
- Energizer contact plates use tool-less indexing.
- Dielectric filters are in a non-submerged cabinet with a Filter Air-Purge function.
- Dielectric reservoir is integrated into the base casting.

## Sources

1. [Related Content](https://www.makino.com/en-us/machine-technology/machines/wire-edm/u6-(1)) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/makino-ux6  
JSON: https://machineschema.com/hardware/makino-ux6.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.