{"id":"makino-ux6","model_id":"UX6","name":"Makino UX6","summary":"The Makino UX6 is a wire electrical discharge machining (EDM) machine with a stationary worktable and X, Y and Z linear axes plus U- and V-axis adjustment. It uses the Makino Hyper-i control with a 24-inch HD touchscreen and supports wire diameters from 0.100 mm to 0.300 mm. The machine cuts conductive workpieces using a wire electrode and dielectric fluid.","study_notes":["U-axis and V-axis each have ±75 mm travel.","Maximum workpiece size is 1000 x 800 x 420 mm.","Work tank size is 1,070 mm x 880 mm.","Available wire diameters are 0.100, 0.150, 0.200, 0.250 and 0.300 mm.","Uses the Makino Hyper-i control with a 24-inch HD touchscreen.","Control operation follows a Program/Setup/Run sequence.","Hyper-i control includes a handbox, E-Tech Doctor help function, digital manuals and instructional videos.","HyperDrive Extreme Guide System provides jet-less wire threading.","Wire guides can be exchanged without vertical wire alignment and repeat to within 5 µm (0.0002 in).","Energizer contact plates use tool-less indexing.","Dielectric filters are in a non-submerged cabinet with a Filter Air-Purge function.","Dielectric reservoir is integrated into the base casting."],"safety_notes":[],"sources":[{"url":"https://www.makino.com/en-us/machine-technology/machines/wire-edm/u6-(1)","title":"Related Content","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":7,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_edm","manufacturer":"makino","controllers":[],"travel_x_mm":650,"travel_y_mm":450,"travel_z_mm":420,"table_length_mm":910,"table_width_mm":710,"table_load_kg":1500,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/makino-ux6","license":"https://creativecommons.org/licenses/by/4.0/"}