# Makino UX3

Hardware · `UX3` · verification: source checked

The Makino UX3 is a wire EDM machine with a stationary worktable and X/Y/Z travels of 370 mm, 270 mm and 220 mm. It uses Makino's Hyper-i control with a 24-inch HD touchscreen and accepts wire diameters from 0.070 mm to 0.300 mm. Its table supports workpieces up to 600 kg.

## Specification

| Property | Value |
|---|---|
| Category | cnc edm |
| Travel X | 370 mm |
| Travel Y | 270 mm |
| Travel Z | 220 mm |
| Table length | 630 mm |
| Table width | 450 mm |
| Table load | 600 kg |

## Connected

- Manufacturer: [Makino](https://machineschema.com/manufacturer/makino.md)

## Study notes

- U-axis and V-axis travel: ±50 mm.
- Maximum workpiece size: 770 x 590 x 220 mm.
- Tank size: 790 mm x 611 mm.
- Available wire diameters: 0.070, 0.100, 0.150, 0.200, 0.250 and 0.300 mm.
- Wire guide assembly repeats to within 5 µm after exchange without vertical wire alignment.
- Makino Hyper-i control uses a 24-inch HD touchscreen and a Program/Setup/Run workflow.
- Di-electric filters are housed in a non-submerged cabinet with a Filter Air-Purge function.
- The machine has a stationary worktable and a pneumatic raise/fall front door.

## Sources

1. [Elevate Your Machining Capabilities Today with the UX3](https://www.makino.com/en-us/machine-technology/machines/wire-edm/ux3) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/makino-ux3  
JSON: https://machineschema.com/hardware/makino-ux3.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.