{"id":"makino-ux3","model_id":"UX3","name":"Makino UX3","summary":"The Makino UX3 is a wire EDM machine with a stationary worktable and X/Y/Z travels of 370 mm, 270 mm and 220 mm. It uses Makino's Hyper-i control with a 24-inch HD touchscreen and accepts wire diameters from 0.070 mm to 0.300 mm. Its table supports workpieces up to 600 kg.","study_notes":["U-axis and V-axis travel: ±50 mm.","Maximum workpiece size: 770 x 590 x 220 mm.","Tank size: 790 mm x 611 mm.","Available wire diameters: 0.070, 0.100, 0.150, 0.200, 0.250 and 0.300 mm.","Wire guide assembly repeats to within 5 µm after exchange without vertical wire alignment.","Makino Hyper-i control uses a 24-inch HD touchscreen and a Program/Setup/Run workflow.","Di-electric filters are housed in a non-submerged cabinet with a Filter Air-Purge function.","The machine has a stationary worktable and a pneumatic raise/fall front door."],"safety_notes":[],"sources":[{"url":"https://www.makino.com/en-us/machine-technology/machines/wire-edm/ux3","title":"Elevate Your Machining Capabilities Today with the UX3","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":7,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_edm","manufacturer":"makino","controllers":[],"travel_x_mm":370,"travel_y_mm":270,"travel_z_mm":220,"table_length_mm":630,"table_width_mm":450,"table_load_kg":600,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/makino-ux3","license":"https://creativecommons.org/licenses/by/4.0/"}