{"id":"makino-u86","model_id":"U86","name":"Makino U86","summary":"The Makino U86 is a wire EDM machine with a stationary work table and X/Y travels of 800 mm and 600 mm. It uses the Hyper i control and a three-sided rise-and-fall work tank, and it is designed to machine workpieces up to 3,000 kg.","study_notes":["Hyper i control uses a 24-inch class touch screen and a Program/Setup/Run operating sequence.","U-axis and V-axis each have ±101 mm travel.","Available wire diameters are 0.20 mm, 0.25 mm, and 0.30 mm.","The description states a standard Z-stroke of 520 mm and an optional 620 mm version; the metric table lists Z travel as 500 mm, while the English table lists 12.6 in (19.7 in optional).","The machine has two independent CNC-controlled flush pumps and uses H.E.A.T. (High Energy Applied Technology) for difficult flushing conditions.","A Split-V wire guide system provides automatic wire threading at full Z-stroke height.","The work tank is listed as 1400 x 910 mm in the metric table and 55.1 x 38.9 in in the English table.","The English table lists maximum workpiece size as 48.0 x 35.8 x 19.7 in."],"safety_notes":["The three-sided rise-and-fall work tank provides unimpeded access to the work zone from three sides for loading and unloading.","Maximum work tank fill height is 50 mm above the highest Z-stroke position."],"sources":[{"url":"https://www.makino.com/en-us/machine-technology/machines/wire-edm/u86","title":"U86 | Makino","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":6,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_edm","manufacturer":"makino","controllers":[],"travel_x_mm":800,"travel_y_mm":600,"table_length_mm":1220,"table_width_mm":910,"table_load_kg":3000,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/makino-u86","license":"https://creativecommons.org/licenses/by/4.0/"}