{"id":"makino-u1310","model_id":"U1310","name":"Makino U1310","summary":"The Makino U1310 is a wire EDM machine with a stationary work table and an opposed L-shape table measuring 1720 x 1475 mm. Axis travels are 1310 mm in X, 1010 mm in Y and 520 mm in Z, with U and V axes of ±101 mm. It cuts workpieces up to 6000 kg using wire diameters of 0.200, 0.250 or 0.300 mm.","study_notes":["Positioning accuracy is stated as ±3 µm (±0.0001 in) over the full stroke.","Z-axis stroke is 520 mm, with an optional 620 mm.","U-axis and V-axis travel are each ±101 mm.","Maximum workpiece size is 2000 x 1600 mm.","Available wire diameters are 0.200, 0.250 and 0.300 mm.","The machine uses the Hyper-i control system with a 24-inch class HD touchscreen; this control is not in the referenced controller list.","The control interface uses pinch, swipe and drag touch operations and follows a Program/Setup/Run three-step process.","A programmable 3-sided drop tank lowers below the work table height for loading, unloading and maintenance access.","The dielectric reservoir is integrated into the base casting to improve thermal stability and reduce installation footprint.","The Split Precision V-Guide system supports automatic wire threading at the full Z-stroke height and is stated to last 34 times longer than round wire guides."],"safety_notes":[],"sources":[{"url":"https://www.makino.com/en-us/machine-technology/machines/wire-edm/u1310","title":"U1310","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":8,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_edm","manufacturer":"makino","controllers":[],"axes":5,"travel_x_mm":1310,"travel_y_mm":1010,"travel_z_mm":520,"table_length_mm":1720,"table_width_mm":1475,"table_load_kg":6000,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/makino-u1310","license":"https://creativecommons.org/licenses/by/4.0/"}