# Makino T2

Hardware · `T2` · verification: source checked

The Makino T2 is a five-axis horizontal machining center with 2,000 mm X, 2,000 mm Y and 1,800 mm Z travels on a 1,000 mm x 1,250 mm pallet. Its spindle runs at 4,000 rpm and is rated 100 kW / 1,000 Nm continuous, and it carries a 120-tool automatic tool changer (190 tools optional). It is intended for milling titanium and titanium-alloy aerospace parts such as edge frames, pylons and bulkheads.

## Specification

| Property | Value |
|---|---|
| Category | cnc mill |
| Axes | 5 |
| Travel X | 2000 mm |
| Travel Y | 2000 mm |
| Travel Z | 1800 mm |
| Spindle max | 4000 rpm |
| Spindle power | 100 kW |
| Rapid traverse | 16 m/min |
| Tool capacity | 120 |
| Table length | 1000 mm |
| Table width | 1250 mm |
| Table load | 5000 kg |

### Joints

| Name | Range min (°) | Range max (°) |
|---|---|---|
| A | -110 | 110 |
| B |  |  |
| C |  |  |

## Connected

- Manufacturer: [Makino](https://machineschema.com/manufacturer/makino.md)

## Study notes

- A-axis travels +/- 110 degrees; B-axis and C-axis rotate 360 degrees infinitely, so no finite range is stated for them.
- Maximum workpiece size is ø1,900 mm x 2,000 mm.
- Cutting feedrate matches rapid traverse at 16,000 mm/min (630 ipm).
- ATC holds 120 tools standard or 190 tools optional; tool-to-tool time 20 s, chip-to-chip 40 s.
- Maximum tool diameter 300 mm and maximum tool weight 30 kg.
- Through-spindle coolant is specified at 7 MPa @ 200 L/min; nozzle coolant at 1.5 MPa @ 50 L/min.
- Spindle rating given as 4,000 rpm at 100 kW / 1,000 Nm continuous (133 HP / 738 ft-lbs in the imperial table).
- Machine features an Active Dampening System, rigid construction and a high-pressure, high-flow coolant system for titanium milling.
- Pallet size in the imperial table is 39.4" x 49.2".
- Tool holder interface (spindle taper), machine weight and positioning repeatability are not stated in the document.

## Sources

1. [Horizontal Machining 5-Axis](https://www.makino.com/en-us/machine-technology/machines/horizontal-5-axis/t2) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/makino-t2  
JSON: https://machineschema.com/hardware/makino-t2.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.