{"id":"makino-t2","model_id":"T2","name":"Makino T2","summary":"The Makino T2 is a five-axis horizontal machining center with 2,000 mm X, 2,000 mm Y and 1,800 mm Z travels on a 1,000 mm x 1,250 mm pallet. Its spindle runs at 4,000 rpm and is rated 100 kW / 1,000 Nm continuous, and it carries a 120-tool automatic tool changer (190 tools optional). It is intended for milling titanium and titanium-alloy aerospace parts such as edge frames, pylons and bulkheads.","study_notes":["A-axis travels +/- 110 degrees; B-axis and C-axis rotate 360 degrees infinitely, so no finite range is stated for them.","Maximum workpiece size is ø1,900 mm x 2,000 mm.","Cutting feedrate matches rapid traverse at 16,000 mm/min (630 ipm).","ATC holds 120 tools standard or 190 tools optional; tool-to-tool time 20 s, chip-to-chip 40 s.","Maximum tool diameter 300 mm and maximum tool weight 30 kg.","Through-spindle coolant is specified at 7 MPa @ 200 L/min; nozzle coolant at 1.5 MPa @ 50 L/min.","Spindle rating given as 4,000 rpm at 100 kW / 1,000 Nm continuous (133 HP / 738 ft-lbs in the imperial table).","Machine features an Active Dampening System, rigid construction and a high-pressure, high-flow coolant system for titanium milling.","Pallet size in the imperial table is 39.4\" x 49.2\".","Tool holder interface (spindle taper), machine weight and positioning repeatability are not stated in the document."],"safety_notes":[],"sources":[{"url":"https://www.makino.com/en-us/machine-technology/machines/horizontal-5-axis/t2","title":"Horizontal Machining 5-Axis","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":17,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"makino","controllers":[],"axes":5,"travel_x_mm":2000,"travel_y_mm":2000,"travel_z_mm":1800,"spindle_max_rpm":4000,"spindle_power_kw":100,"rapid_traverse_m_min":16,"tool_capacity":120,"table_length_mm":1000,"table_width_mm":1250,"table_load_kg":5000,"joints":[{"name":"A","range_min_deg":-110,"range_max_deg":110},{"name":"B"},{"name":"C"}],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/makino-t2","license":"https://creativecommons.org/licenses/by/4.0/"}