# Makino Slim5n APC

Hardware · `Slim5n APC` · verification: source checked

The Makino Slim5n APC is a 3-axis vertical machining center with an integral pallet changer. It has a 16,000 rpm HSK-A50 spindle and a 24-tool automatic tool changer. The machine is intended for production part machining and supports automation options.

## Specification

| Property | Value |
|---|---|
| Category | cnc mill |
| Axes | 3 |
| Travel X | 710 mm |
| Travel Y | 400 mm |
| Travel Z | 410 mm |
| Spindle max | 16000 rpm |
| Spindle taper | HSK-A50 |
| Rapid traverse | 60 m/min |
| Tool capacity | 24 |
| Table length | 900 mm |
| Table width | 593 mm |
| Table load | 300 kg |

## Connected

- Manufacturer: [Makino](https://machineschema.com/manufacturer/makino.md)

## Study notes

- Standard spindle speed is 16,000 rpm; an 8,000 rpm spindle is optional.
- Cutting feedrate range is 1–20,000 mm/min.
- Maximum workpiece size is ø1,320 mm x 475 mm with limitations.
- The integral pallet changer allows setup on one pallet while machining on the other pallet.
- The 24-tool ATC uses an armless direct tool pick with an integral door.
- A lift-up chip conveyor at the rear evacuates chips; the work zone has sloped surfaces.
- Auto doors are included; robot interface is optional.

## Sources

1. [Slim5n APC](https://www.makino.com/en-us/machine-technology/machines/vertical-machining-centers-3-axis/slim5n-apc) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/makino-slim5n-apc  
JSON: https://machineschema.com/hardware/makino-slim5n-apc.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.