{"id":"makino-slim5n-apc","model_id":"Slim5n APC","name":"Makino Slim5n APC","summary":"The Makino Slim5n APC is a 3-axis vertical machining center with an integral pallet changer. It has a 16,000 rpm HSK-A50 spindle and a 24-tool automatic tool changer. The machine is intended for production part machining and supports automation options.","study_notes":["Standard spindle speed is 16,000 rpm; an 8,000 rpm spindle is optional.","Cutting feedrate range is 1–20,000 mm/min.","Maximum workpiece size is ø1,320 mm x 475 mm with limitations.","The integral pallet changer allows setup on one pallet while machining on the other pallet.","The 24-tool ATC uses an armless direct tool pick with an integral door.","A lift-up chip conveyor at the rear evacuates chips; the work zone has sloped surfaces.","Auto doors are included; robot interface is optional."],"safety_notes":[],"sources":[{"url":"https://www.makino.com/en-us/machine-technology/machines/vertical-machining-centers-3-axis/slim5n-apc","title":"Slim5n APC","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":12,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"makino","controllers":[],"axes":3,"travel_x_mm":710,"travel_y_mm":400,"travel_z_mm":410,"spindle_max_rpm":16000,"spindle_taper":"HSK-A50","rapid_traverse_m_min":60,"tool_capacity":24,"table_length_mm":900,"table_width_mm":593,"table_load_kg":300,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/makino-slim5n-apc","license":"https://creativecommons.org/licenses/by/4.0/"}