{"id":"makino-n2-5xa","model_id":"N2-5XA","name":"Makino N2-5XA","summary":"The Makino N2-5XA is a 5-axis horizontal machining center with a 200 mm pallet and 300 x 300 x 230 mm travels, intended for small near-net-shape parts such as orthopedic implants and aero-engine components. Its twin direct-drive rotary axes (A and B) sit in a trunnion casting, and it uses a 20,000 rpm HSK-A40 spindle with through-spindle coolant and a 36-tool automatic tool changer. Control is by the Makino Pro6 with Super Geometric Intelligence contour control.","study_notes":["A-axis has 160° total travel (-120° to +40°) and is direct drive; B-axis is direct drive with unlimited 360° rotation.","C-axis is listed as not applicable.","Spindle speed range is 20 to 20,000 rpm and reaches maximum rpm in 0.8 seconds.","Rapid traverse is 42,000 mm/min on X and Y and 56,000 mm/min on Z; cutting feedrate is 32,000 mm/min.","Z-axis acceleration is 1.4G.","Control is the Makino Pro6 with Super Geometric Intelligence (SGI) contour machining control; this controller is not in the reference controller list.","Standard 320 psi through-spindle coolant system.","Standard high-capacity lift-up chip conveyor with permanent media drum filter and cyclonic coolant filter.","Maximum workpiece size is 300 mm diameter x SR270 mm, with limitations.","Tool to tool time is 2.5 s and chip to chip time is 4.9 s; maximum tool diameter is Ø50 x 180 mm and maximum tool weight is 2 kg.","Machine occupies 54 square feet of floor space.","Pallet size is 200 mm diameter."],"safety_notes":[],"sources":[{"url":"https://www.makino.com/en-us/machine-technology/machines/horizontal-5-axis/n2-5xa","title":"Horizontal Machining 5-Axis","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":14,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"makino","controllers":[],"axes":5,"travel_x_mm":300,"travel_y_mm":300,"travel_z_mm":230,"spindle_max_rpm":20000,"spindle_taper":"HSK-A40","rapid_traverse_m_min":56,"tool_capacity":36,"table_load_kg":30,"joints":[{"name":"A-Axis","range_min_deg":-120,"range_max_deg":40},{"name":"B-Axis"}],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/makino-n2-5xa","license":"https://creativecommons.org/licenses/by/4.0/"}