{"id":"makino-f5-pro-6","model_id":"F5 Pro 6","name":"Makino F5 Pro 6","summary":"The F5 Pro 6 is a vertical 3-axis machining center built on a casting and axis layout without overhangs, fitted with 8 mm pitch ballscrews and 0.05-micron scale feedback on X, Y and Z. It carries a 20,000 RPM HSK-A63 two-range spindle and a 30-tool magazine, and is intended for hard milling of die/mold and medical parts with 3-D contoured geometry. Positioning accuracy is stated as ±0.0015 mm and repeatability as ±0.001 mm.","study_notes":["Positioning accuracy stated as ±0.000060 inch (0.0015 mm); repeatability ±0.000040 inch (0.001 mm).","Control is the Makino Professional 6, running a Windows CE operating system with touch-screen GUI; it is not one of the referenced controller entries.","Standard spindle is 20,000 RPM HSK-A63, two-range; a 30,000 RPM HSK-F63 spindle is an option.","Cutting feedrate is listed as 20,000 mm/min (787 ipm), the same value as rapid traverse.","Maximum workpiece size is 1,000 x 500 x 450 mm.","Maximum tool diameter 120 mm (4.72 in) and maximum tool weight 8 kg (17.6 lbs).","Scale feedback on X, Y and Z axes and 8 mm fine-pitch ballscrews are standard.","Standard equipment includes SGI.5 (Super Geometric Intelligence) software, data center with 1 GB, part program storage 2 GB, 1,000 program numbers and 64 tool offset pairs.","Other standard features listed: ATC shutter, automatic air blow, nozzle coolant, rear coolant tank with chip augers, rigid tapping, centralized auto grease, fully enclosed splash guard, portable manual pulse generator, air dryer, helical interpolation, G10 programming data input, tool offset memory C, cutter compensation C, run hour meter package."],"safety_notes":[],"sources":[{"url":"https://www.makino.com/en-us/machine-technology/machines/vertical-machining-centers-3-axis/f5-pro-6-vertical-machining-center","title":"Related Content","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":13,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"makino","controllers":[],"axes":3,"repeatability_mm":0.001,"travel_x_mm":900,"travel_y_mm":500,"travel_z_mm":450,"spindle_max_rpm":20000,"spindle_taper":"HSK-A63","rapid_traverse_m_min":20,"tool_capacity":30,"table_length_mm":1000,"table_width_mm":500,"table_load_kg":1000,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/makino-f5-pro-6","license":"https://creativecommons.org/licenses/by/4.0/"}