{"id":"makino-ednc17","model_id":"EDNC17","name":"Makino EDNC17","summary":"The Makino EDNC17 is a sinker EDM machine with a stationary work table and a 4-sided programmable rise-and-fall work tank. It has X/Y/Z travels of 1,700/1,150/800 mm and a table measuring 2,000 x 1,350 mm. The machine uses Makino's HS-Rib high-speed Z-axis and Hyper-i control system.","study_notes":["Work tank dimensions are 2,500 x 1,600 x 800 mm.","ATC capacity is available in 8-, 16-, or 32-tool configurations; the ATC is located externally from the work tank.","Z-axis uses the Makino HS-Rib design with jump speeds up to 20 m/min and 1.0 G acceleration.","The Z-axis ball screw is core-cooled by a dedicated closed-loop chiller unit.","Control is Makino Hyper-i with a 24-inch class touch screen and on-machine EDM Assist and E-Tech Doctor support.","Generator technologies are SuperSpark IV and HyperCut.","The dielectric reservoir is integrated into the base casting."],"safety_notes":["Maximum electrode weight: 100 kg (220 lb).","Maximum available amperage: 60 A to 240 A.","Maximum workpiece size: 2,500 x 1,600 mm (98.4 x 63.0 in)."],"sources":[{"url":"https://www.makino.com/en-us/machine-technology/machines/sinker-edm/ednc17","title":"EDNC17","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":8,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_edm","manufacturer":"makino","controllers":[],"travel_x_mm":1700,"travel_y_mm":1150,"travel_z_mm":800,"rapid_traverse_m_min":5,"table_length_mm":2000,"table_width_mm":1350,"table_load_kg":10000,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/makino-ednc17","license":"https://creativecommons.org/licenses/by/4.0/"}