{"id":"makino-edaf2-fh","model_id":"EDAF2-FH","name":"Makino EDAF2-FH","summary":"The EDAF2-FH is a Makino EDM machine that performs standard Ram EDM and precision EDM hole drilling. It has X, Y and Z travels of 350 mm, 250 mm and 350 mm and a table measuring 21.7 in by 13.8 in. It uses a programmable W-axis for hole drilling and a C-axis for indexing and continuous rotation.","study_notes":["Performs both standard Ram EDM and precision EDM hole drilling on one machine.","Uses traditional Ram EDM dielectric oil.","Programmable W-axis is independent but parallel to the Z-axis and carries the die guide and middle guide support components.","The W-axis middle guides support small-diameter electrodes and prevent vibration or bending during machining.","The W-axis arm can be removed and installed in less than a minute using quick disconnects and a rigid Curvic coupler.","Standard high-speed C-axis provides precision indexing and continuous rotation up to 2,000 rpm.","High-pressure pump is available with 6 MPa (870 psi) or 10 MPa (1,490 psi) capability.","Uses the Makino Hyper-i control with a 24-inch class high-definition touch screen.","Includes a programmable rise and fall work tank.","The dielectric reservoir is built into the base casting.","Chilled fluid is circulated through the Y-axis and Z-axis structures."],"safety_notes":["Equipped with a U/V flame sensor and fire extinguisher system for unattended operation."],"sources":[{"url":"https://www.makino.com/en-us/machine-technology/machines/edm-hole-drilling/edaf2-fh","title":"EDM Hole Drilling","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":7,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_edm","manufacturer":"makino","controllers":[],"travel_x_mm":350,"travel_y_mm":250,"travel_z_mm":350,"table_length_mm":551.18,"table_width_mm":350.52,"table_load_kg":500,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/makino-edaf2-fh","license":"https://creativecommons.org/licenses/by/4.0/"}