{"id":"makino-d800z-40-taper","model_id":"D800Z (40 Taper)","name":"Makino D800Z (40 Taper)","summary":"The Makino D800Z (40 Taper) is a vertical machining center with five axes: X, Y, Z, B, and C. It uses a CAT40 spindle and a 40-tool magazine to mill workpieces, and its table accepts loads up to 1,200 kg. Linear travels are 1,200 mm in X, 1,100 mm in Y, and 650 mm in Z.","study_notes":["Table diameter is 800 mm.","Optional HSK-A63 spindle is available at 20,000 rpm.","Optional tool magazine capacity is 80 tools.","Tool-to-tool time is 3 s; chip-to-chip time is 9 s.","Machine dimensions are 3,200 mm x 5,070 mm x 3,600 mm.","Cutting feedrate is 36,000 mm/min.","SGI.5 software is Makino's control software for high-feedrate, tight-tolerance machining of complex 3-D contours.","Tool Center Point (TCP) control permits programming based on the tool tip.","C-axis rotation is 360°."],"safety_notes":["Functions are included to prevent interference between the spindle and trunnion during automatic operation.","Maximum workpiece size is 1,000 mm diameter by 500 mm, with limitations.","Maximum tool diameter is 140 mm with limitations.","Maximum tool weight is 8 kg."],"sources":[{"url":"https://www.makino.com/en-us/machine-technology/machines/vertical-5-axis/d800z-(40-taper)","title":"D800Z (40 Taper)","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":14,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"makino","controllers":[],"axes":5,"travel_x_mm":1200,"travel_y_mm":1100,"travel_z_mm":650,"spindle_max_rpm":14000,"spindle_taper":"CAT40","rapid_traverse_m_min":36,"tool_capacity":40,"table_load_kg":1200,"joints":[{"name":"B","range_min_deg":-180,"range_max_deg":0},{"name":"C"}],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/makino-d800z-40-taper","license":"https://creativecommons.org/licenses/by/4.0/"}