{"id":"makino-a61nx","model_id":"a61nx","name":"Makino a61nx","summary":"The Makino a61nx is a 4-axis horizontal machining center with a 500 x 500 mm pallet. It has 730 mm X-axis and Y-axis travel, 800 mm Z-axis travel, a 14,000 rpm CAT40 spindle, and a 60-tool automatic tool changer. The document describes it as a production machine for automotive and high-volume part production.","study_notes":["Cutting feedrate is 50,000 mm/min.","Maximum workpiece size is ø800 mm x 1,000 mm.","Spindle torque is 303 Nm.","Tool-to-tool time is 0.9 s and chip-to-chip time is 2.5 s.","Maximum tool diameter is 205 mm and maximum tool weight is 12 kg.","ATC capacity can be increased from 60 tools to 133, 218 or 313 tools.","The B-axis is described as a 360° direct-drive NC rotary table (DD NCRT).","The machine is available in a tall-column version with a 730 mm column.","A Vision-type broken tool sensor in the ATC magazine checks drills, taps and other single-point tools.","Inertia Active Control monitors motor load and estimates fixture weight to adjust B- and Z-axis acceleration and deceleration.","An optional 20,000 rpm spindle is listed as 20K.","Optional maximum payload is 700 kg."],"safety_notes":[],"sources":[{"url":"https://www.makino.com/en-us/machine-technology/machines/horizontal-4-axis/a61nx","title":"a61nx","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":12,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"makino","controllers":[],"axes":4,"travel_x_mm":730,"travel_y_mm":730,"travel_z_mm":800,"spindle_max_rpm":14000,"spindle_taper":"CAT40 (HSK-A63 opt)","rapid_traverse_m_min":60,"tool_capacity":60,"table_length_mm":500,"table_width_mm":500,"table_load_kg":500,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/makino-a61nx","license":"https://creativecommons.org/licenses/by/4.0/"}