{"id":"kitamura-mycenter-hx1000g","model_id":"Mycenter-HX1000G","name":"Kitamura Mycenter-HX1000G","summary":"The Mycenter-HX1000G is a horizontal 4-axis machining center with a 1000 x 1000 mm table and X/Y/Z travels of 2040 x 1350 x 1370 mm. It carries an 8000 rpm, 4-step gear-driven spindle with NST No. 50 taper and a 150-position fixed-pot automatic tool changer. Twin ballscrews and twin servo motors on the linear axes give 36 m/min rapid traverse, and linear scale feedback is fitted on all axes.","study_notes":["Positioning accuracy is stated as ±0.002 mm over full stroke; repeatability is ±0.001 mm.","A standard 2-APC (two-pallet changer) with a full 4th-axis rotary table is fitted, allowing machining from multiple part angles in one set-up.","Optional items listed: 12,000 min-1 spindle and 200-tool storage capacity.","Tool change time is stated as 6.7 s tool-to-tool and 12 s chip-to-chip minimum.","B-axis rapid feed is 11.1 min-1 (4,000 deg/min).","X/Y/Z use patented twin ballscrew and dual feedback technology with a 67 million pulse encoder plus scale feedback on all axes.","The machine control is the Arumatik-Mi CNC with a touch-screen, icon-driven interface; this control is not in the reference controller list.","Power requirement is stated as 85 kVA at 200 V AC, 3 phase.","Guideways are induction-hardened box ways manufactured in house.","Maximum workpiece envelope is stated as 2050 mm (87 in) diameter x 1550 mm (61 in) high."],"safety_notes":[],"sources":[{"url":"https://www.kitamura-machinery.com/products/kitamura-mycenterhx1000g-horizontal-machining-center/","title":"Mycenter-HX1000G Horizontal Machining Center | Kitamura Machinery","accessed":"2026-10-26"}],"verification":{"status":"source_checked","checked_at":"2026-10-26","values":14,"method":"llm_source_check"},"updated_at":"2026-10-26","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"kitamura","controllers":[],"axes":4,"repeatability_mm":0.001,"travel_x_mm":2040,"travel_y_mm":1350,"travel_z_mm":1370,"spindle_max_rpm":8000,"spindle_taper":"NST No. 50","rapid_traverse_m_min":36,"tool_capacity":150,"table_length_mm":1000,"table_width_mm":1000,"supply_voltage":"200 V AC, 3 phase","max_workpiece_diameter_mm":2050,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/kitamura-mycenter-hx1000g","license":"https://creativecommons.org/licenses/by/4.0/"}