# Kitamura Mycenter-5XVII

Hardware · `Mycenter-5XVII` · verification: source checked

The Mycenter-5XVII is a vertical 3-axis machining center with a 700 x 1420 mm table and travels of 1270 x 710 x 635 mm. It uses a No. 40 taper spindle rated to 15,000 rpm and a 40-position automatic tool changer. The document describes the Arumatik-Mi control, thermal compensation, and probing readiness.

## Specification

| Property | Value |
|---|---|
| Category | cnc mill |
| Axes | 3 |
| Repeatability | 0.001 mm |
| Travel X | 1270 mm |
| Travel Y | 710 mm |
| Travel Z | 635 mm |
| Spindle max | 15000 rpm |
| Spindle power | 30.573694752 kW |
| Spindle taper | NST No. 40 |
| Rapid traverse | 52 m/min |
| Tool capacity | 40 |
| Table length | 1420 mm |
| Table width | 700 mm |
| Supply voltage | 200 V AC, 3 Phase |

## Connected

- Manufacturer: [Kitamura](https://machineschema.com/manufacturer/kitamura.md)

## Study notes

- Positioning accuracy is stated as ±0.002 mm over full stroke; repeatability is ±0.001 mm.
- Tool change time is stated as 2.2 s tool-to-tool and 4.2 s chip-to-chip minimum.
- Power requirement is 45 kVA, 200 V AC, 3 phase.
- Rapid feed is stated as 52 m/min (2,047 ipm) and 42 m/min (1,890 ipm) for X, Y, Z; the rapid_traverse_m_min field holds the fastest stated rate, 52 m/min.
- The machine uses the Arumatik-Mi control; no matching controller entry is available in the provided reference list.
- The control is described with touch-screen icon operation and conventional control methods.
- IAC System 1 thermal compensation is stated.
- A Renishaw probe system is stated as ready for on-machine probing.
- The spindle is described as a dual-contact, built-in #40 spindle.
- An advanced chip management system is described.

## Sources

1. [Mycenter-5XVII Vertical Machining Center | Kitamura Machinery](https://www.kitamura-machinery.com/products/mycenter5xv/) (accessed 2026-10-26)

---

Source page: https://machineschema.com/hardware/kitamura-mycenter-5xvii  
JSON: https://machineschema.com/hardware/kitamura-mycenter-5xvii.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.