{"id":"kitamura-mycenter-4xvii","model_id":"Mycenter-4XVII","name":"Kitamura Mycenter-4XVII","summary":"The Kitamura Mycenter-4XVII is a 3-axis vertical machining center with a 510 x 1120 mm table and X, Y and Z travels of 1020, 510 and 510 mm. It uses a 15,000 rpm NST No. 40 spindle and a 40-position automatic tool changer. The machine is controlled by the Arumatik-Mi CNC and has a 60 m/min rapid traverse rate.","study_notes":["Positioning accuracy is stated as ±0.002 mm over full stroke.","Spindle speed range is 50–15,000 min⁻¹.","Tool change time is 2.2 s tool-to-tool and 4.2 s chip-to-chip at minimum.","The Arumatik-Mi control is described as touch-screen icon-driven; it has no matching controller entry in the reference list.","IAC System 1 thermal compensation is included.","Standard chip handling includes a scraper-type chip conveyor, base wash and internal chip augers; the conveyor can be installed on either side of the machine.","The machine is prepared for a Renishaw probe system for on-machine probing.","Power requirement is 40 kVA at 200 V AC, 3-phase.","Spindle is listed as 41 HP.","The document also lists B-axis rapid feeds of 52 m/min (2,047 ipm) and 42 m/min (1,890 ipm)."],"safety_notes":[],"sources":[{"url":"https://www.kitamura-machinery.com/products/mycenter4xv/","title":"Mycenter-4XV XVII Series Vertical Machining Center | Kitamura Machinery","accessed":"2026-10-26"}],"verification":{"status":"source_checked","checked_at":"2026-10-26","values":13,"method":"llm_source_check"},"updated_at":"2026-10-26","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"kitamura","controllers":[],"axes":3,"repeatability_mm":0.001,"travel_x_mm":1020,"travel_y_mm":510,"travel_z_mm":510,"spindle_max_rpm":15000,"spindle_taper":"NST No. 40","rapid_traverse_m_min":60,"tool_capacity":40,"table_length_mm":1120,"table_width_mm":510,"supply_voltage":"200 V AC, 3 Phase","joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/kitamura-mycenter-4xvii","license":"https://creativecommons.org/licenses/by/4.0/"}