{"id":"kitamura-mycenter-3xvii","model_id":"Mycenter-3XVII","name":"Kitamura Mycenter-3XVII","summary":"The Mycenter-3XVII is a compact vertical machining center with three linear axes (X, Y, Z) and a 40-taper spindle. It carries a 500 x 860 mm table with X/Y/Z travels of 760 x 510 x 510 mm and a 30-position automatic tool changer. It is intended for milling small to medium sized workpieces and uses the Arumatik-Mi CNC control.","study_notes":["Table size stated as 500 x 860 mm (19.7 in x 33.9 in).","Spindle speed range 50 to 15,000 min-1 with NST No. 40 taper; spindle is built-in and dual contact.","Spindle rated 41 HP in the document.","Tool change time 2.2 s tool-to-tool and 4.2 s chip-to-chip, stated as minimum.","Rapid feed 52 m/min (2,047 ipm) on X and Y, 42 m/min (1,890 ipm) on Z.","Positioning accuracy +/-0.002 mm over full stroke; repeatability +/-0.001 mm.","Power requirement 40 kVA at 200 V AC, 3-phase.","Arumatik-Mi control with touch-screen, icon-driven interface; document claims up to 16x faster processing than conventional controls.","IAC System 1 thermal compensation system is fitted.","Ready for use with a Renishaw on-machine probing system."],"safety_notes":["Electrical supply requirement stated as 40 kVA, 200 V AC, 3-phase."],"sources":[{"url":"https://www.kitamura-machinery.com/products/mycenter3xv/","title":"Mycenter-3XVII Vertical Machining Center | Kitamura Machinery","accessed":"2026-10-26"}],"verification":{"status":"source_checked","checked_at":"2026-10-26","values":13,"method":"llm_source_check"},"updated_at":"2026-10-26","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"kitamura","controllers":[],"axes":3,"repeatability_mm":0.001,"travel_x_mm":760,"travel_y_mm":510,"travel_z_mm":510,"spindle_max_rpm":15000,"spindle_power_kw":30.57,"spindle_taper":"NST No. 40","rapid_traverse_m_min":52,"tool_capacity":30,"table_length_mm":860,"table_width_mm":500,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/kitamura-mycenter-3xvii","license":"https://creativecommons.org/licenses/by/4.0/"}