{"id":"kitamura-jigcenter-5g","model_id":"Jigcenter-5G","name":"Kitamura Jigcenter-5G","summary":"The Jigcenter-5G is a vertical 3-axis jig borer built on a double column bridge type design with box ways, intended for milling and boring of tight-tolerance parts. It uses a 4-step geared #40 spindle running up to 20,000 min-1, a 50-station tool storage, and linear scale feedback on the X, Y and Z axes. Positioning accuracy is stated as ±0.001 mm over full stroke with repeatability of ±0.0005 mm.","study_notes":["Positioning accuracy is stated as ±0.001 mm (±0.000039 in) over full stroke.","Fine pitch ballscrews of 8 mm are used, with a ballscrew cooling system fitted as standard.","IAC System 1 (Intelligent Advanced Control) thermal compensation is standard.","SSS (Super Smooth Surface) control is stated with 8,190 block look-ahead.","Spindle is a 4-step gear driven, dual contact type with 20-20,000 min-1 range.","Tool storage capacity is 50 tools, with 100 tools available as an option.","HSK-A63 spindle taper is listed as an option to the standard NST No. 40.","Power requirement is 45 kVA at 200 V AC, 3 phase.","Machine control is the Arumatik-Mi, with touch-screen icon-driven interface; it is not in the controller reference list.","Construction is Meehanite cast iron with induction hardened solid box ways; the double column bridge design supports the Y-axis over full stroke.","Document text also refers to the machine as the Jigcenter-5."],"safety_notes":[],"sources":[{"url":"https://www.kitamura-machinery.com/products/kitamura-jigcenter5-vertical-jig-boring-machine/","title":"Jigcenter-5G J-Series Double Column Machining Center | Kitamura Machinery","accessed":"2026-10-26"}],"verification":{"status":"source_checked","checked_at":"2026-10-26","values":14,"method":"llm_source_check"},"updated_at":"2026-10-26","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"kitamura","controllers":[],"axes":3,"repeatability_mm":0.0005,"travel_x_mm":815,"travel_y_mm":745,"travel_z_mm":500,"spindle_max_rpm":20000,"spindle_taper":"NST No. 40","rapid_traverse_m_min":25,"tool_capacity":50,"table_length_mm":1200,"table_width_mm":780,"supply_voltage":"200 V AC, 3 Phase","feedback":"Linear scale feedback in X, Y, Z axes","joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/kitamura-jigcenter-5g","license":"https://creativecommons.org/licenses/by/4.0/"}