{"id":"keyence-cs-lgs30pc","model_id":"CS-LGS30PC","name":"KEYENCE CS-LGS30PC","summary":"The CS-LGS30PC is a linear cylinder sensor for gripper models, fitted in an SMC C-shaped slot. It detects the magnetic flux of a cylinder piston over a 30 mm sensor body and reports piston position through an open-collector output or through IO-Link. It is used to confirm gripper open/closed position on pneumatic grippers.","study_notes":["Sensor size 30 mm (1.18 in).","Supported slot shape is the SMC C-shaped slot; other C/T-shaped slot cylinders may need optional brackets, and slot shape/size varies by cylinder manufacturer and type.","Minimum detectable magnetic flux density 2 mT; maximum supported speed 1 m/s.","Resolution 0.01 mm; repeatability guaranteed by KEYENCE inspection facilities and may vary with installation environment.","Linearity (reference value) ±0.3 mm.","Detection cycle 1 ms; default response time 5 ms, settable as fast as 3 ms with a high-functionality amplifier, panel or IO-Link; response time increases by up to +13 ms when a high-functionality amplifier is used.","Number of outputs is 2 when using just the sensor and 4 when connected to IO-Link or the SP-N/V Series.","Control output is open-collector, 30 VDC or less, 50 mA total for 2 outputs, residual voltage 2.5 V or less.","Network function is IO-Link Specification v1.1/COM3.","Body materials are aluminum alloy, SUS304 and PBT; weight approx. 10 g (0.35 oz).","NPN operation is possible when using a high-functionality amplifier."],"safety_notes":["Enclosure rating IP65/IP67 per IEC 60529.","Power supply must be 18 to 30 VDC including ripple, Class 2 or LPS.","Keep cable length to 30 m or less for the PNP M8 connector type, and 20 m or less when connecting via IO-Link.","Built-in protection: reverse polarity protection and output overcurrent protection.","No impact monitoring function is provided.","Ambient temperature range -20 to +60 °C with no freezing; relative humidity up to 85 % RH with no condensation."],"sources":[{"url":"https://www.keyence.com/products/sensor/cylinder-sensor/cs-lg/specs/","title":"Specs Linear Cylinder Sensor for Grippers CS-LG series","accessed":"2026-10-26"}],"verification":{"status":"source_checked","checked_at":"2026-10-26","values":9,"method":"llm_source_check"},"updated_at":"2026-10-26","type":"hardware","spec":{"category":"sensor","manufacturer":"keyence","controllers":[],"weight_kg":0.01,"supply_voltage":"18 to 30 VDC","output_type":"PNP (open collector, M8 connector)","power_consumption_kw":0.00051,"operating_temp_min_c":-20,"operating_temp_max_c":60,"joints":[],"protocols":["io-link"],"standards":["iec-60529"],"error_codes":[]},"url":"https://machineschema.com/hardware/keyence-cs-lgs30pc","license":"https://creativecommons.org/licenses/by/4.0/"}