{"id":"hurco-vmx6030","model_id":"VMX6030","name":"Hurco VMX6030","summary":"The VMX6030 is a three-axis vertical CNC machining centre with travels of 1524 mm in X, 762 mm in Y and 610 mm in Z. Its spindle runs up to 12000 RPM with a CAT 40 taper and 18 kW of power, and a 40-position automatic tool changer. It is intended for batch production, one-off parts and die/mould work.","study_notes":["Spindle torque is listed as 238.7 Nm (176.1 ft lbs).","Spindle nose to table distance is 101 mm (4 in).","Tool-to-tool ATC time is 2 seconds.","Maximum tool size accepted by the ATC: 76 mm diameter, 300 mm length, 7 kg weight.","The VMX line uses belt-drive spindles; the VMXD line uses direct-drive spindles.","A separate 'Turret' section repeats the tool capacity of 40."],"safety_notes":[],"sources":[{"url":"https://hurco.com/products/3-axis-machining-centers/vmx/vmx6030","title":"VMX6030 3-Axis CNC Machining Center | Hurco","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":13,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"hurco","controllers":[],"axes":3,"weight_kg":11833,"travel_x_mm":1524,"travel_y_mm":762,"travel_z_mm":610,"spindle_max_rpm":12000,"spindle_power_kw":18,"spindle_taper":"CAT 40","tool_capacity":40,"table_length_mm":1680,"table_width_mm":762,"table_load_kg":2000,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/hurco-vmx6030","license":"https://creativecommons.org/licenses/by/4.0/"}