{"id":"hurco-vmx6030-50t","model_id":"VMX6030-50T","name":"Hurco VMX6030-50T","summary":"The Hurco VMX6030-50T is a three-axis vertical machining centre with travels of 1524 mm in X, 762 mm in Y and 610 mm in Z. It uses a CAT 50 spindle that turns up to 8000 RPM and is driven by a 22.2 kW motor, and it carries a 30-position automatic tool changer. Its table measures 1680 by 762 mm and accepts up to 2000 kg of workpiece.","study_notes":["Spindle torque is 353.3 Nm.","Spindle nose to table distance is 101 mm.","Tool-to-tool change time is 2 seconds.","Maximum tool diameter is 120 mm, maximum tool length 300 mm, and maximum tool weight 15 kg.","The VMX series uses a belt-drive spindle; the VMXD designation refers to direct drive."],"safety_notes":[],"sources":[{"url":"https://hurco.com/products/3-axis-machining-centers/vmx/vmx6030-50t","title":"Hurco • Mind Over Metal","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":13,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"hurco","controllers":[],"axes":3,"weight_kg":11647,"travel_x_mm":1524,"travel_y_mm":762,"travel_z_mm":610,"spindle_max_rpm":8000,"spindle_power_kw":22.2,"spindle_taper":"CAT 50","tool_capacity":30,"table_length_mm":1680,"table_width_mm":762,"table_load_kg":2000,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/hurco-vmx6030-50t","license":"https://creativecommons.org/licenses/by/4.0/"}