{"id":"hurco-vmx50d","model_id":"VMX50D","name":"Hurco VMX50D","summary":"The Hurco VMX50D is a 3-axis vertical CNC mill with travels of 1270 mm (X), 661 mm (Y) and 610 mm (Z). It uses a 22 kW belt-drive spindle with a CAT 40 taper running up to 15000 rpm, and carries a 1500 x 660 mm table rated for 1818 kg. It is the belt-drive (VMX) version of the VMX/VMXD series, which is also offered with a direct-drive spindle.","study_notes":["Belt-drive (VMX) spindle; the VMXD models of the same series use an inline direct-drive 15000 rpm spindle.","Tool capacity is stated as 30 / 40, i.e. it depends on the tool-changer configuration.","Tool-to-tool ATC time is 1.5 s.","Maximum tool diameter 80 mm, maximum tool length 300 mm, maximum tool weight 7 kg.","Spindle torque is 140 Nm.","Spindle nose to table distance is 101 mm (also listed as spindle nose 101 mm / 4 in).","Spindle power is listed as 22 kW / 29.5 hp."],"safety_notes":[],"sources":[{"url":"https://hurco.com/products/3-axis-machining-centers/vmx/vmx50d","title":"VMX50D 3-Axis CNC Machining Center | Hurco","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":12,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"hurco","controllers":[],"axes":3,"weight_kg":8880,"travel_x_mm":1270,"travel_y_mm":661,"travel_z_mm":610,"spindle_max_rpm":15000,"spindle_power_kw":22,"spindle_taper":"CAT 40","table_length_mm":1500,"table_width_mm":660,"table_load_kg":1818,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/hurco-vmx50d","license":"https://creativecommons.org/licenses/by/4.0/"}