{"id":"hurco-vmx50","model_id":"VMX50","name":"Hurco VMX50","summary":"The VMX50 is a 3-axis vertical CNC machining centre with travels of 1270 mm (X), 661 mm (Y) and 610 mm (Z). It uses a 12,000 RPM belt-drive spindle with a CAT 40 taper rated at 18 kW, and a 30/40-position automatic tool changer. The table measures 1500 x 660 mm and carries up to 2000 kg.","study_notes":["Spindle torque is stated as 238.7 Nm.","Spindle nose to table distance is 101 mm; the spindle nose is also listed as 101 mm.","Tool-to-tool ATC time is 2 seconds.","Tool changer accepts tools up to 80 mm diameter, 300 mm length and 7 kg weight.","Tool capacity is given as \"30 / 40\" for both the ATC and turret sections, i.e. two options rather than a single value.","The VMX series uses a belt-drive spindle; a direct-drive version is designated VMXD.","Machine weight is 8680 kg."],"safety_notes":[],"sources":[{"url":"https://hurco.com/products/3-axis-machining-centers/vmx/vmx50","title":"VMX50 3-Axis CNC Machining Center | Hurco","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":12,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"hurco","controllers":[],"axes":3,"weight_kg":8680,"travel_x_mm":1270,"travel_y_mm":661,"travel_z_mm":610,"spindle_max_rpm":12000,"spindle_power_kw":18,"spindle_taper":"CAT 40","table_length_mm":1500,"table_width_mm":660,"table_load_kg":2000,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/hurco-vmx50","license":"https://creativecommons.org/licenses/by/4.0/"}