# Hurco VMX50-50T

Hardware · `VMX50-50T` · verification: source checked

The Hurco VMX50-50T is a 3-axis vertical CNC milling machine with travels of 1270 mm (X), 661 mm (Y) and 610 mm (Z). It uses a CAT 50 spindle rated at 8000 RPM and 22.2 kW, and carries up to 2000 kg on a 1500 x 660 mm table. A 30-position automatic tool changer serves the spindle.

## Specification

| Property | Value |
|---|---|
| Category | cnc mill |
| Axes | 3 |
| Weight | 9380 kg |
| Travel X | 1270 mm |
| Travel Y | 661 mm |
| Travel Z | 610 mm |
| Spindle max | 8000 rpm |
| Spindle power | 22.2 kW |
| Spindle taper | CAT 50 |
| Tool capacity | 30 |
| Table length | 1500 mm |
| Table width | 660 mm |
| Table load | 2000 kg |

## Connected

- Manufacturer: [Hurco](https://machineschema.com/manufacturer/hurco.md)

## Study notes

- Spindle torque is listed as 353.3 Nm.
- Spindle nose to table distance is 101 mm; spindle nose is also given as 101 mm.
- Tool-to-tool ATC time is 4 seconds.
- Tool changer limits: max tool diameter 125 mm, max tool length 300 mm, max tool weight 15 kg.
- The VMX line uses belt-drive spindles while the VMXD line uses direct-drive spindles.
- A second section of the document repeats the same capacity, spindle, ATC and weight figures, and lists tool capacity 30 again under a 'Turret' heading.
- No machine controller or control model is named in the document.
- No rapid traverse rate, repeatability or positioning accuracy values are stated.

## Sources

1. [VMX50-50T 3-Axis CNC Machining Center | Hurco](https://hurco.com/products/3-axis-machining-centers/vmx/vmx50-50t) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/hurco-vmx50-50t  
JSON: https://machineschema.com/hardware/hurco-vmx50-50t.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.