{"id":"hurco-vmx50-50t","model_id":"VMX50-50T","name":"Hurco VMX50-50T","summary":"The Hurco VMX50-50T is a 3-axis vertical CNC milling machine with travels of 1270 mm (X), 661 mm (Y) and 610 mm (Z). It uses a CAT 50 spindle rated at 8000 RPM and 22.2 kW, and carries up to 2000 kg on a 1500 x 660 mm table. A 30-position automatic tool changer serves the spindle.","study_notes":["Spindle torque is listed as 353.3 Nm.","Spindle nose to table distance is 101 mm; spindle nose is also given as 101 mm.","Tool-to-tool ATC time is 4 seconds.","Tool changer limits: max tool diameter 125 mm, max tool length 300 mm, max tool weight 15 kg.","The VMX line uses belt-drive spindles while the VMXD line uses direct-drive spindles.","A second section of the document repeats the same capacity, spindle, ATC and weight figures, and lists tool capacity 30 again under a 'Turret' heading.","No machine controller or control model is named in the document.","No rapid traverse rate, repeatability or positioning accuracy values are stated."],"safety_notes":[],"sources":[{"url":"https://hurco.com/products/3-axis-machining-centers/vmx/vmx50-50t","title":"VMX50-50T 3-Axis CNC Machining Center | Hurco","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":13,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"hurco","controllers":[],"axes":3,"weight_kg":9380,"travel_x_mm":1270,"travel_y_mm":661,"travel_z_mm":610,"spindle_max_rpm":8000,"spindle_power_kw":22.2,"spindle_taper":"CAT 50","tool_capacity":30,"table_length_mm":1500,"table_width_mm":660,"table_load_kg":2000,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/hurco-vmx50-50t","license":"https://creativecommons.org/licenses/by/4.0/"}