# Hurco VMX30D

Hardware · `VMX30D` · verification: source checked

The Hurco VMX30D is a 3-axis CNC milling machine with a 15 kW spindle rated to 15,000 rpm and a CAT 40 taper. Its travels are 762 mm in X, 508 mm in Y and 610 mm in Z, with a 1020 x 510 mm table that carries up to 1500 kg. Machine weight is 4780 kg.

## Specification

| Property | Value |
|---|---|
| Category | cnc mill |
| Axes | 3 |
| Weight | 4780 kg |
| Travel X | 762 mm |
| Travel Y | 508 mm |
| Travel Z | 610 mm |
| Spindle max | 15000 rpm |
| Spindle power | 15 kW |
| Spindle taper | CAT 40 |
| Table length | 1020 mm |
| Table width | 510 mm |
| Table load | 1500 kg |

## Connected

- Manufacturer: [Hurco](https://machineschema.com/manufacturer/hurco.md)

## Study notes

- Spindle torque is listed as 95.5 N·m.
- Tool-to-tool ATC time is 1.5 s.
- Maximum tool diameter 80 mm, maximum tool length 300 mm, maximum tool weight 7 kg.
- Spindle nose to table distance is 125 mm.
- Tool capacity is written as 30 / 40, giving two figures rather than a single value.
- Machine weight is 4780 kg (11,685 lb).
- The document also describes Hurco VMXD models with an inline 15,000 rpm direct-drive spindle, while VMX models use a belt-drive spindle.

## Sources

1. [VMX30D 3-Axis CNC Machining Center | Hurco](https://hurco.com/products/3-axis-machining-centers/vmx/vmx30d) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/hurco-vmx30d  
JSON: https://machineschema.com/hardware/hurco-vmx30d.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.