{"id":"hurco-vmx30d","model_id":"VMX30D","name":"Hurco VMX30D","summary":"The Hurco VMX30D is a 3-axis CNC milling machine with a 15 kW spindle rated to 15,000 rpm and a CAT 40 taper. Its travels are 762 mm in X, 508 mm in Y and 610 mm in Z, with a 1020 x 510 mm table that carries up to 1500 kg. Machine weight is 4780 kg.","study_notes":["Spindle torque is listed as 95.5 N·m.","Tool-to-tool ATC time is 1.5 s.","Maximum tool diameter 80 mm, maximum tool length 300 mm, maximum tool weight 7 kg.","Spindle nose to table distance is 125 mm.","Tool capacity is written as 30 / 40, giving two figures rather than a single value.","Machine weight is 4780 kg (11,685 lb).","The document also describes Hurco VMXD models with an inline 15,000 rpm direct-drive spindle, while VMX models use a belt-drive spindle."],"safety_notes":[],"sources":[{"url":"https://hurco.com/products/3-axis-machining-centers/vmx/vmx30d","title":"VMX30D 3-Axis CNC Machining Center | Hurco","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":12,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"hurco","controllers":[],"axes":3,"weight_kg":4780,"travel_x_mm":762,"travel_y_mm":508,"travel_z_mm":610,"spindle_max_rpm":15000,"spindle_power_kw":15,"spindle_taper":"CAT 40","table_length_mm":1020,"table_width_mm":510,"table_load_kg":1500,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/hurco-vmx30d","license":"https://creativecommons.org/licenses/by/4.0/"}