{"id":"hurco-vmx24","model_id":"VMX24","name":"Hurco VMX24","summary":"The Hurco VMX24 is a 3-axis vertical CNC machining centre with travels of 610 mm in X, 508 mm in Y and 610 mm in Z. It uses a 9 kW belt-drive spindle with a CAT 40 taper running up to 12,000 RPM, and a 30-position automatic tool changer. The table measures 762 x 510 mm and carries up to 1500 kg.","study_notes":["Spindle torque is stated as 95.5 Nm.","Spindle nose to table distance is 152 mm.","Tool-to-tool change time is 2 seconds.","Maximum tool diameter is 80 mm, maximum tool length 300 mm and maximum tool weight 7 kg.","The VMX line uses belt-drive spindles; the VMXD version uses direct-drive spindles.","The ATC and turret sections both list a tool capacity of 30."],"safety_notes":[],"sources":[{"url":"https://hurco.com/products/3-axis-machining-centers/vmx/vmx24","title":"VMX24 3-Axis CNC Machining Center | Hurco","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":13,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"hurco","controllers":[],"axes":3,"weight_kg":4710,"travel_x_mm":610,"travel_y_mm":508,"travel_z_mm":610,"spindle_max_rpm":12000,"spindle_power_kw":9,"spindle_taper":"CAT 40","tool_capacity":30,"table_length_mm":762,"table_width_mm":510,"table_load_kg":1500,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/hurco-vmx24","license":"https://creativecommons.org/licenses/by/4.0/"}