# Hurco VM20

Hardware · `VM20` · verification: source checked

The VM20 is a 3-axis vertical CNC machining center in the VM series. It has travels of 1016 mm (X), 508 mm (Y) and 508 mm (Z), a 1168 x 508 mm table rated to 1800 kg, and a 15 kW spindle with a CAT 40 taper turning up to 12000 RPM. It is equipped with a 24-position automatic tool changer and is controlled by the WinMax CNC control.

## Specification

| Property | Value |
|---|---|
| Category | cnc mill |
| Axes | 3 |
| Weight | 4140 kg |
| Travel X | 1016 mm |
| Travel Y | 508 mm |
| Travel Z | 508 mm |
| Spindle max | 12000 rpm |
| Spindle power | 15 kW |
| Spindle taper | CAT 40 |
| Tool capacity | 24 |
| Table length | 1168 mm |
| Table width | 508 mm |
| Table load | 1800 kg |

## Connected

- Manufacturer: [Hurco](https://machineschema.com/manufacturer/hurco.md)

## Study notes

- The document does not give a rapid traverse rate or a tool-to-tool ATC time (the ATC time is listed as TBD).
- Spindle torque is 98.8 Nm.
- Spindle nose to table distance is 101.6 mm.
- ATC limits: max tool diameter 80 mm, max tool length 250 mm, max tool weight 7 kg.
- WinMax CNC control is named as the machine control; no matching controller entry exists in the reference list, so no controller reference is given.
- A separate 'Turret' heading repeats a tool capacity of 24, the same value as the ATC.

## Sources

1. [VM20 3-Axis CNC Machining Center | Hurco](https://hurco.com/products/3-axis-machining-centers/vm/vm20) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/hurco-vm20  
JSON: https://machineschema.com/hardware/hurco-vm20.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.