{"id":"hurco-vm20","model_id":"VM20","name":"Hurco VM20","summary":"The VM20 is a 3-axis vertical CNC machining center in the VM series. It has travels of 1016 mm (X), 508 mm (Y) and 508 mm (Z), a 1168 x 508 mm table rated to 1800 kg, and a 15 kW spindle with a CAT 40 taper turning up to 12000 RPM. It is equipped with a 24-position automatic tool changer and is controlled by the WinMax CNC control.","study_notes":["The document does not give a rapid traverse rate or a tool-to-tool ATC time (the ATC time is listed as TBD).","Spindle torque is 98.8 Nm.","Spindle nose to table distance is 101.6 mm.","ATC limits: max tool diameter 80 mm, max tool length 250 mm, max tool weight 7 kg.","WinMax CNC control is named as the machine control; no matching controller entry exists in the reference list, so no controller reference is given.","A separate 'Turret' heading repeats a tool capacity of 24, the same value as the ATC."],"safety_notes":[],"sources":[{"url":"https://hurco.com/products/3-axis-machining-centers/vm/vm20","title":"VM20 3-Axis CNC Machining Center | Hurco","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":13,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"hurco","controllers":[],"axes":3,"weight_kg":4140,"travel_x_mm":1016,"travel_y_mm":508,"travel_z_mm":508,"spindle_max_rpm":12000,"spindle_power_kw":15,"spindle_taper":"CAT 40","tool_capacity":24,"table_length_mm":1168,"table_width_mm":508,"table_load_kg":1800,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/hurco-vm20","license":"https://creativecommons.org/licenses/by/4.0/"}