{"id":"hurco-vm10hs","model_id":"VM10HS","name":"Hurco VM10HS","summary":"The Hurco VM10HS is a compact 3-axis vertical CNC machining center in the VM series, built on a one-piece cast iron frame. It has travels of 661 mm (X), 407 mm (Y) and 508 mm (Z), and a 762 x 406 mm table rated for 1500 kg. The spindle reaches 20,000 RPM with a BT 30 taper and a 20-position automatic tool changer.","study_notes":["Equipped with the WinMax CNC control; no matching controller entry exists in the reference list.","Spindle torque is 5.4 Nm.","Spindle nose to table distance is 101.6 mm.","Tool-to-tool ATC time is 1.5 seconds.","Maximum tool diameter is 80 mm, maximum tool length 250 mm, maximum tool weight 3 kg.","The document lists tool capacity as 20 both under ATC and under a separate Turret heading."],"safety_notes":[],"sources":[{"url":"https://hurco.com/products/3-axis-machining-centers/vm/vm10hs","title":"VM10HS 3-Axis CNC Machining Center | Hurco","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":13,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"hurco","controllers":[],"axes":3,"weight_kg":3060,"travel_x_mm":661,"travel_y_mm":407,"travel_z_mm":508,"spindle_max_rpm":20000,"spindle_power_kw":8.5,"spindle_taper":"BT 30","tool_capacity":20,"table_length_mm":762,"table_width_mm":406,"table_load_kg":1500,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/hurco-vm10hs","license":"https://creativecommons.org/licenses/by/4.0/"}