# Hurco VM10

Hardware · `VM10` · verification: source checked

The Hurco VM10 is a compact 3-axis CNC machining center with a one-piece cast iron frame. It has 661 mm of X travel, 407 mm of Y travel and 508 mm of Z travel, and a 762 x 406 mm table rated for 1500 kg. The spindle runs up to 12000 RPM with CAT 40 tooling and an 11 kW motor, and tools are changed from a 24-position automatic tool changer.

## Specification

| Property | Value |
|---|---|
| Category | cnc mill |
| Axes | 3 |
| Weight | 3230 kg |
| Travel X | 661 mm |
| Travel Y | 407 mm |
| Travel Z | 508 mm |
| Spindle max | 12000 rpm |
| Spindle power | 11 kW |
| Spindle taper | CAT 40 |
| Tool capacity | 24 |
| Table length | 762 mm |
| Table width | 406 mm |
| Table load | 1500 kg |

## Connected

- Manufacturer: [Hurco](https://machineschema.com/manufacturer/hurco.md)

## Study notes

- The document states the machine uses the WinMax CNC control; no matching controller entry is available.
- Tool-to-tool ATC time is listed as 2 seconds.
- Maximum tool diameter is 80 mm, maximum tool length 250 mm and maximum tool weight 7 kg.
- Spindle torque is listed as 72.4 Nm.
- Spindle nose to table distance is 101.6 mm.
- The document lists tool capacity as 24 under both ATC and Turret headings.
- The VM10 belongs to the VM series of 3-axis CNC machining centers.

## Sources

1. [VM10 3-Axis CNC Machining Center | Hurco](https://hurco.com/products/3-axis-machining-centers/vm/vm10) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/hurco-vm10  
JSON: https://machineschema.com/hardware/hurco-vm10.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.