{"id":"hurco-tm10my","model_id":"TM10MY","name":"Hurco TM10MY","summary":"The Hurco TM10MY is a CNC lathe with live tooling and Y-axis motion. It has X/Y/Z travels of 234.5 mm, 55 mm, and 790 mm and a 12-position tool turret. The main spindle reaches 3,500 rpm and the live spindle reaches 5,000 rpm.","study_notes":["Distance between centers: 743 mm (29.25 in).","Chuck diameter: 260 mm (10.24 in).","Main spindle torque: 520.2 Nm (383.99 ft lbs).","Live spindle: max speed 5,000 rpm, torque 47.6 Nm, power 14.94 kW.","Turret tool shank: 25 mm x 25 mm; max boring bar diameter: 32 mm.","Swing over cross slide diameter: 560 mm (22.05 in).","Y-axis rapid traverse: 12 m/min; X- and Z-axis rapid traverse: 30 m/min.","Slant-bed angle: 30 degrees.","ATC maximum tool diameter: 560 mm."],"safety_notes":[],"sources":[{"url":"https://hurco.com/products/turning-centers/tmmy/tm10my","title":"Hurco • Mind Over Metal","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":13,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_lathe","manufacturer":"hurco","controllers":[],"travel_x_mm":234.5,"travel_y_mm":55,"travel_z_mm":790,"spindle_max_rpm":3500,"spindle_power_kw":40,"spindle_taper":"BMT55","rapid_traverse_m_min":30,"tool_capacity":12,"max_swing_mm":560,"max_turning_diameter_mm":400,"max_turning_length_mm":636,"bar_capacity_mm":81,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/hurco-tm10my","license":"https://creativecommons.org/licenses/by/4.0/"}