# Hurco DCX32

Hardware · `DCX32` · verification: source checked

The Hurco DCX32 is a double column, 3-axis vertical machining center with travels of 3200 mm (X), 2100 mm (Y) and 920 mm (Z). It uses a CAT 50 spindle rated at 48 kW and 6000 RPM, and carries a 40-position automatic tool changer. The table measures 3000 mm by 1700 mm and accepts workpieces up to 11000 kg.

## Specification

| Property | Value |
|---|---|
| Category | cnc mill |
| Axes | 3 |
| Weight | 34940 kg |
| Travel X | 3200 mm |
| Travel Y | 2100 mm |
| Travel Z | 920 mm |
| Spindle max | 6000 rpm |
| Spindle power | 48 kW |
| Spindle taper | CAT 50 |
| Tool capacity | 40 |
| Table length | 3000 mm |
| Table width | 1700 mm |
| Table load | 11000 kg |

## Connected

- Manufacturer: [Hurco](https://machineschema.com/manufacturer/hurco.md)

## Study notes

- 3-axis vertical machining center in a double column configuration.
- Spindle torque is stated as 458 Nm.
- Spindle nose to table distance is 164 mm.
- Tool-to-tool ATC time is 5 seconds; the ATC is described as a swing-arm type.
- Maximum tool length is 300 mm and maximum tool weight is 15 kg.
- Maximum tool diameter is listed only in inches, as 4.92 in.
- Tool capacity is listed as 40 under both the ATC and the turret headings.

## Sources

1. [Hurco • Mind Over Metal](https://hurco.com/products/double-column/dcx/dcx32) (accessed 2026-10-25)

---

Source page: https://machineschema.com/hardware/hurco-dcx32  
JSON: https://machineschema.com/hardware/hurco-dcx32.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.