{"id":"hurco-dcx32","model_id":"DCX32","name":"Hurco DCX32","summary":"The Hurco DCX32 is a double column, 3-axis vertical machining center with travels of 3200 mm (X), 2100 mm (Y) and 920 mm (Z). It uses a CAT 50 spindle rated at 48 kW and 6000 RPM, and carries a 40-position automatic tool changer. The table measures 3000 mm by 1700 mm and accepts workpieces up to 11000 kg.","study_notes":["3-axis vertical machining center in a double column configuration.","Spindle torque is stated as 458 Nm.","Spindle nose to table distance is 164 mm.","Tool-to-tool ATC time is 5 seconds; the ATC is described as a swing-arm type.","Maximum tool length is 300 mm and maximum tool weight is 15 kg.","Maximum tool diameter is listed only in inches, as 4.92 in.","Tool capacity is listed as 40 under both the ATC and the turret headings."],"safety_notes":[],"sources":[{"url":"https://hurco.com/products/double-column/dcx/dcx32","title":"Hurco • Mind Over Metal","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":13,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"hurco","controllers":[],"axes":3,"weight_kg":34940,"travel_x_mm":3200,"travel_y_mm":2100,"travel_z_mm":920,"spindle_max_rpm":6000,"spindle_power_kw":48,"spindle_taper":"CAT 50","tool_capacity":40,"table_length_mm":3000,"table_width_mm":1700,"table_load_kg":11000,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/hurco-dcx32","license":"https://creativecommons.org/licenses/by/4.0/"}