{"id":"hurco-dcx32-5s","model_id":"DCX32-5S","name":"Hurco DCX32-5S","summary":"The Hurco DCX32-5S is a double-column CNC vertical machining center. Its X-, Y-, and Z-axis travels are 3200 mm, 2100 mm, and 900 mm, and the table measures 3000 mm by 1700 mm and accepts up to 11000 kg. The spindle table lists an 18000 rpm HSK-63A spindle rated at 63 kW, and the machine has a 40-position tool changer; the document also lists B- and C-axis travels.","study_notes":["The document describes the machine as a 3-axis vertical machining center while its specification table lists X, Y, Z, B, and C axes.","The description mentions a swing-arm ATC and CAT50 spindles, while the spindle table lists HSK-63A.","B-axis travel is +100° / -110°; C-axis travel is 360°.","B-axis maximum speed is 120 RPM; C-axis maximum speed is 80 RPM.","Spindle torque is 106 Nm.","Spindle nose and spindle nose-to-table distance are both listed as 66 mm.","Tool-to-tool ATC time is 5 seconds.","Maximum tool length is 300 mm, maximum tool weight is 7 kg, and maximum tool diameter is 3 in.","The turret section also lists a tool capacity of 40."],"safety_notes":[],"sources":[{"url":"https://hurco.com/products/double-column/dcx/dcx32-5s","title":"Hurco • Mind Over Metal","accessed":"2026-10-25"}],"verification":{"status":"source_checked","checked_at":"2026-10-25","values":12,"method":"llm_source_check"},"updated_at":"2026-10-25","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"hurco","controllers":[],"weight_kg":37640,"travel_x_mm":3200,"travel_y_mm":2100,"travel_z_mm":900,"spindle_max_rpm":18000,"spindle_power_kw":63,"spindle_taper":"HSK-63A","tool_capacity":40,"table_length_mm":3000,"table_width_mm":1700,"table_load_kg":11000,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/hurco-dcx32-5s","license":"https://creativecommons.org/licenses/by/4.0/"}