{"id":"grob-g700f","model_id":"G700F","name":"GROB G700F","summary":"The G700F is a horizontal-spindle machining center built on the GROB G-series concept, intended for frame-structure and chassis parts in automotive work. Its working travels are 1,450 mm in X, 990 mm in Y and 1,035 mm in Z, with an interference diameter of 1,500 mm in the A- and B-axis. The narrow bridge gives access to the underside of the part for six-sided machining, and it can run stand-alone or linked to other machines.","study_notes":["Working travel is 1,450 mm (X), 990 mm (Y) and 1,035 mm (Z).","Maximum axis speed is 60 m/min in X, 75 m/min in Y and 100 m/min in Z.","Position accuracy is 0.01 mm in the X, Y and Z axes.","Chip-to-chip time t1 is 2.9 s according to VDI 2852, quoted relative to rotational speed.","Table diameter is 512 mm; table load is 750 kg without pallet and 605 kg with pallet.","Total weight is 24,000 kg without pallet changer and 31,000 kg with pallet changer.","Parts up to 1,500 x 900 mm can be machined; interference diameter in the A- and B-axis is 1,500 mm.","Motorized spindle versions: HSK-A63 47 Nm at 12,000 rpm, HSK-A63 47 Nm at 18,000 rpm, HSK-A63 83 Nm at 12,000 rpm, HSK-A63 86 Nm at 17,000 rpm, HSK-A100 185.5 Nm at 12,000 rpm, HSK-A100 340 Nm at 10,000 rpm.","Tool magazine options are a single disk-type magazine or a double disk-type magazine.","Loading options: manual or automatic front loading, or automatic top loading via robots, Cartesian linear gantry, or linear gantry with telescope; front loading via swiveling changer.","GROB Spindle Diagnostics (GSD) monitors motorized spindle condition; the Chip-in-Spindle Detection System (SiS) detects tool clamping faults caused by chips from 10 μm.","Example process shown: suspension strut dome in aluminium alloy on an 18,000 rpm motorized spindle at 29 kW / 34.6 Nm."],"safety_notes":[],"sources":[{"url":"https://www.grobgroup.com/en/products/product-range/machining-technology/machining-centers-for-frame-structure-parts/g700f/","title":"G700F","accessed":"2026-10-26"}],"verification":{"status":"source_checked","checked_at":"2026-10-26","values":5,"method":"llm_source_check"},"updated_at":"2026-10-26","type":"hardware","spec":{"category":"cnc_mill","manufacturer":"grob","controllers":[],"travel_x_mm":1450,"travel_y_mm":990,"travel_z_mm":1035,"rapid_traverse_m_min":100,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/grob-g700f","license":"https://creativecommons.org/licenses/by/4.0/"}