{"id":"grob-g350t","model_id":"G350T","name":"GROB G350T","summary":"The GROB G350T is a 5-axis universal mill-turn machining center with three linear axes and two rotary axes. It supports 5-sided machining, 5-axis simultaneous interpolation and GROB TRAORI turning, and its horizontal spindle and tunnel work area allow long tools to be swiveled and machined without collision. It is intended for machining smaller parts in one setup.","study_notes":["Positioning accuracy in X/Y/Z is 0.006 mm.","Chip-to-chip time t1 is 2.7 s according to VDI 2852, relative to spindle speed in rpm.","Table diameter is 570 mm.","B-axis maximum speed is 1,200 rpm.","Max linear axis speeds are 70 m/min in X, 45 m/min in Y and 90 m/min in Z.","GROB4Pilot is available for SIEMENS 840D sl and HEIDENHAIN TNC 640 control systems; these controls are not in the controller reference list.","GROB Spindle Diagnostics (GSD) automatically monitors motorized spindle condition.","Interpolation turning PLUS enables turning operations on the G350T.","Three linear axes and two rotary axes permit 5-sided machining, 5-axis simultaneous interpolation and GROB TRAORI turning."],"safety_notes":["A-axis swivel range is 230 degrees; B-axis swivel range is 360 degrees.","Maximum table load is 270 kg with pallet and 350 kg without pallet.","Tool length limit for the single disk-type tool magazine is 365 mm for HSK-A/T63.","Tool length limits for the double disk-type tool magazine are 365 mm bottom, 180 mm top and 550 mm over both disks for HSK-A/T63."],"sources":[{"url":"https://www.grobgroup.com/en/products/product-range/universal-machining-centers/mill-turn-machining-centers/g350t/","title":"G350T","accessed":"2026-10-26"}],"verification":{"status":"source_checked","checked_at":"2026-10-26","values":12,"method":"llm_source_check"},"updated_at":"2026-10-26","type":"hardware","spec":{"category":"cnc_multitasking","manufacturer":"grob","controllers":[],"axes":5,"weight_kg":15500,"travel_x_mm":600,"travel_y_mm":855,"travel_z_mm":750,"spindle_max_rpm":16000,"spindle_power_kw":32,"spindle_taper":"HSK-A/T63","rapid_traverse_m_min":90,"spindle_torque_nm":206,"max_workpiece_diameter_mm":620,"joints":[],"protocols":[],"standards":[],"error_codes":[]},"url":"https://machineschema.com/hardware/grob-g350t","license":"https://creativecommons.org/licenses/by/4.0/"}