# AGIE CHARMILLES CUT 1000 NANO9

Hardware · `CUT 1000 NANO9` · verification: source checked

The CUT 1000 NANO9 is a wire-cut EDM machine. Its X, Y and Z travels are 220 x 160 x 100 mm, and it accepts workpieces up to 300 x 200 x 80 mm and 35 kg. It uses deionized water dielectric and supports wire diameters from 0.07 to 0.20 mm, with 0.02 to 0.05 mm optional.

## Specification

| Property | Value |
|---|---|
| Category | cnc edm |
| Weight | 2700 kg |
| Travel X | 220 mm |
| Travel Y | 160 mm |
| Travel Z | 100 mm |
| Max workpiece weight | 35 kg |
| U travel | 40 mm |
| V travel | 40 mm |
| Max taper | 3 ° |

## Connected

- Manufacturer: [GF Machining Solutions](https://machineschema.com/manufacturer/gf-machining-solutions.md)

## Study notes

- The document names the manufacturer as AGIE CHARMILLES; this record uses the available GF Machining Solutions manufacturer id.
- Machine dimensions are 1400 x 1900 x 1970 mm.
- Total weight without dielectric is 2700 kg.
- U and V travel are each stated as ±40 mm.
- Maximum workpiece dimensions are 300 x 200 x 80 mm, stated as width x depth x height.
- Maximum taper angle and height are stated as ±3° over 80 mm.
- Dielectric type is deionized water.
- Wire diameter range is 0.07 to 0.20 mm, with an optional 0.02 to 0.05 mm range.
- Minimum surface roughness Ra is 0.08 µm.

## Sources

1. [CUT 1000 NANO9](https://www.agiecharmilles.com/wire-cutting-edm/cut-1000-nano9) (accessed 2026-10-26)

---

Source page: https://machineschema.com/hardware/gf-machining-solutions-cut-1000-nano9  
JSON: https://machineschema.com/hardware/gf-machining-solutions-cut-1000-nano9.json  
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite Machine Schema and the original sources.